They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, (BHT, N25HT, N5HT, RHT, MHT, SHT) must be installed into filter housing.ġ6 bar Filters for removal of solid particles, water, oil aerosolsĪAF filters are designed for protection of the downstream compressed air system andĮquipment with lower air flows against defects and other failures. To meet the required compressed air quality, appropriate filter element Types: Aluminium compressed air filters, (high pressure) welded carbon steel compressed air filters, welded stainless steel filters, vacuum pump protection filters, medical filters, silicone free compressed air filters, carbon steel high pressure filters, stainless steel process filters.ġ6 bar Aluminium compressed air filters - AFġ0 bar Aluminium high temperature compressed air filtersĪF HT filter housings are designed for very high efficient removal of solid particles, waterĪnd oil aerosols, from compressed air systems in high temperature applications. Types of filters vary depending on the application, the pressure level and type of contaminants. Clean and dry air protects the compressed air system, reduces maintenance costs and increases finished product quality. Compressed air filters, often referred to as line filters, are used to remove these contaminates from compressed air. Compressed air quality is essential to all modern production facilities. After compression has taken place these contaminants become concentrated and more destructive. Since the condensate is approximately 95% water and 5% oil, water/oil separators have been developed to reduce or eliminate the amount of oil in the condensate.Īirborne particles, water vapour, microbes, and chemical gases enter compressors. An oil/water separator can be used here to remove the oil from the condensate. Compressor condensate must therefore be either collected and treated by special processes or treated prior to disposal to the environment. This is the reason that environmental regulations strictly prohibit the discharge of oily wastes and chemicals, including the condensate drained from a compressed air system.Ĭompressed air condensate must therefore be treated in accordance with water resource legislation to achieve prescribed safety levels before it can be disposed of in the waste water system. ![]() Just one litre of used oil can contaminate up to one million litres of fresh water. The lubricant will mix with the condensation and create an oily water that must be properly handled to avoid violating environmental regulations. Oil carryover is unavoidable if you have compressors that use oil in the compression chamber. ![]() ![]() It is a chemically aggressive fluid that mainly consists of water, but also contains oil and dirt particles. Condensate is an unavoidable result of air compression.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |