![]() We stick to "quality and service first, continuous improvement and innovation " as the management principle and "zero defect, zero complaints" as the quality objective. is located in Qingdao, Shandong province of China, specializing in manufacturing forestry and agricultural machinery with high quality and competitive price. We own our factory and can supply the machines with competitive price.ĭelivery date: Shipment within 20 days after receiving the deposit. (When the engine is first operated with a new oil filter, the oil level will drop slightly as the filter is filled with oil.5. Stop the engine, recheck the oil level, and add oil if necessary. Start the engine and check for oil leaks around the oil filter.DO NOT overfill the crankcase (oil above “F” mark) as this CAN result in engine overheating, loss of power, and possible engine damage. IMPORTANT: Check the dipstick reading before adding the last 1/2 pint of oil and fill only to the “F” mark. Crankcase capacity is 2.0 quarts (1.9 liters) plus 1/2 pint (0.24 liters) for the new oil filter. Fill up to, but not above, the “F” mark on the dipstick. Refer to Crankcase Lubricant in the Specifications section of your operator's manual for other options. Kohler PRO 300 Hour Synthetic Engine Oil (SAE 10W-50) and filters are highly recommended. Fill the crankcase with new, clean oil.Close the oil drain valve and tighten until snug.Turn the filter clockwise until the rubber gasket contacts the sealing surface, then tighten an additional 3/4 to 1 turn. Install the new oil filter on the engine. ![]() Aftermarket oil filters may not seal properly and/or may not have the correct pressure relief valve for proper lubrication. IMPORTANT: Use ONLY oil filters from the engine manufacturer (Kohler 25-050-53-S).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |